Posts from the ‘repurpose’ Category

Thrifty Bulletin Board

Hello follower bloggers and readers! Today I want to share with you my thrifty bulletin board project!

I’ve had some cork pieces laying around always with the ambition of doing something with them in my dorm, and then when I moved out of there, my apartment, and when I moved out of there, I finally decided to make a bulletin board for my condo.
The Finished ProductThis project cost me around $6. I bought the frame at Goodwill for $4, a bottle of paint from Michaels for $1 with a coupon (which I always search for on my phone while shopping at craft stores), and $1 toward a package of sponge brushes. The rest of the supplies I found laying around my place, such as the cork, finishing nails, and ribbon. (I figured rummaging your own home for supplies could be considered “thrifty”.)

I began the project by removing the glass and lovely print of two tigers. I started painting the frame white to have a base for the light blue. This way the color wouldn’t turn out dingy.

IMG_1128While letting the first coat dry, I recruited help from my fiancé, Matthew, to cut the cork into rectangles to fit into the frame. I didn’t have a large enough piece of cork to make it solid so we made a little design.

IMG_1129IMG_1127

Once the first layer of paint dried, I painted a thin layer of blue on top because I wanted a little of the white to peak through.

IMG_1132While that was drying, we glued and nailed the cork to the original cardboard backing. When if came time to reattach the backing now with the cork to the frame, I realized that I don’t have a staple gun to hold it in place. So I used small finishing nails in the four corners and along the sides to keep the backing in place. I then attached the ribbon with some thumb tacks and hung the finished project on the wall with some personal touches!

IMG_1201The whole project simply took one afternoon to complete which gave me a proud sense of accomplishment for the day. Hey it’s the little things in life. And I got to spend the day working on something with Matthew which is always a treat.

Please leave any questions or comments below. We love your feedback and would also like to hear about your projects!

Thanks, Colleen

 

 

 

 

 

 

$2 Coffee Corner

Welcome to our Cafe!! My roommate and I have a real hankering for coffee and we wanted to make a little cafe bar in our living room. With some Pinterest inspo, $2, and some elbow grease, here’s our finished product! IMG_1276When we moved in, this desk was in our condo and our landlady told us to do with it as we pleased. I figured I’d use if for some project but didn’t have time for it at the moment, so it spent a winter on our back deck. IMG_1133Enduring the great outdoors, the desk got a little beat up and suffered water damage. But we figured it just added a “rustic” vibe to it.

I gathered my few supplies at a local thrift store. Which included $1 paint brush and $1 old can of paint (which I ended up getting for free at the register, so we’ll count the other dollar toward gas). We love free!!

IMG_1258 First I removed the top of the desk that was attached with only a few screws, thankfully this some what protected the top surface from compete water damage.

IMG_1134I then removed the drawers and the hardware on them in order to begin painting.

IMG_1259After wiping down all the surfaces with a wet rag, I started layering on the paint. I didn’t bother to sand or prime the surface, I would recommend this for a more finished look. IMG_1261After about three coats of paint the brown no longer peaked through, I let it dry over night and the next day I simply reattached the pulls and brought it inside. With a few finishing touches and a fresh bouquet of flowers, we had a revamped coffee corner and this time it has storage.

Here’s what we were using before (blah):

IMG_1262

And here’s our before and after of the new set up:

IMG_1133

IMG_1276Thanks for reading! Please leave any comments or questions below!

Colleen

Barn wood Hope Chest

image

After hours of searching through my stash of barnwood lumber I had picked out the wood for the hope chest that I would be giving my, girlfriend at the time, now fiance.

The next step was to layout all the pieces of the frame to get an idea of the footprint.

image

I built the base first using 2×4’s. The frame itself is 4 2×4’s cut at 45 degree angles and doweled together. The support pieces in the center were ripped off of 2×4’s as well and then doweled to the outer frame. To glue it all up I used some ratcheting straps and a couple of extra hands.

image

After the glue up, I ripped the aromatic cedar boards to the correct dimensions and placed the on the supports.

image

Now that the base was complete I moved on to the frame for the chest. There are two levels of 2×4’s that come the 4×4’s. To achieve this I mortised the 4×4’s on the correct corners and made a tenon on each end of the 2×4’s. The tenons were then cut at 45 degree angles to meet flush inside the 4×4 creating a very strong joint.

image

After getting the frame just how I wanted, I ripped more of the cedar lumber down to create an inner wall for the chest.

image

Next I made feet for the chest out of 4×4’s. To accomplish this I made two cuts into the 4×4 to make an “L” shape with a notch in the back. I think cut the curved sections on a band saw.

image

image

I installed the outer walls, putting a 2×4 ripped down to 1×2 to act as spacers for the inner and outer walls on the long sections. The ends contain “hidden compartments” with hangers for jewelry. The picture above shows the finish going on before the inner cedar walls are installed for the final time.

image

I wanted to keep pressure on the inner walls during the glue-up. So, I stole the bottle jack from my pickup (thankfully I didn’t have a flat tire during this).
image

Next I installed the outer doors after attaching the chest to the base. These are mounted on hinges and supported by brass chains. A magnetic latch releases the doors when depressed. I rounded off the top inside edge of each door to ensure that each opened and closed smoothly. Now for the lid…
image

The lid has an inner wall of aromatic cedar and outer of barnwoods to match the rest of the chest. The 2×4’s have mortise and tenons, as shown in the photo above, and the cedar boards ripped from the lumber was attached using dowel joints.
image

I commissioned the carving above out of walnut. This would later be installed on the inside of lid for the chest.
image

The final glue-up for this project was the top barnwoods panels for the lid. Four pieces make up the outer wall of the lid. Two slender pieces on the outside perpendicular to the longer boards to add a little geometric interest.

image

image

image

And finally to finish it off with the stamp of approval.

This was about a yearlong process. It had it’s trials, but the end result was a unique gift for a very deserving girlfriend (now fiance).

image

image

The hope chest in it’s current resting place with the barnwood mirror referenced in a previous blog I had written.

Barn Wood Mirror

IMG_20121231_121639_247IMG_20121231_141816_803IMG_20130104_221918_547

IMG950018

This framed mirror is made from 2×4’s from a 100 year old barn. No fancy joinery necessary here. The boards are glued together using pipe clamps and then a plywood board is screwed on the back of the 2×4’s. The mirror is glued into the middle section. The hinges are screwed into the 2×4’s for aesthetics. The barn wood is finished with a water based polyurethane. This is easily a weekend project.

Barn Wood Bench

barnwood bench 1barnwood bench 2

barnwood bench 3

This is made from the same lumber taken from the 100 year old barn that I tore down. It’s an interesting mix of douglas fir, oak, and redwood. All is old growth and has very tight grain. Needless to say, the bench ended up substantially heavy. I used through mortises to connect the legs to the top. Then I drilled dowels through the mortise and tenons to secure them from falling out if the glue should fail. I drilled from the middle of each of the two outside boards so the dowels would not show up on the bench top. Once the dowels were drilled and glued in, I put the sleeve over both ends to hold all four boards together. I used a dado blade to cut the ends of the 2×4’s to fit into the sleeve. The sleeve was made using a mortiser. It was finished with a water based polyurethane. This ended up going to a Christmas exchange

Barn Wood Coat Rack

IMAG0192 My shitzu helper. Pulling nails from the
main post of the coat rack.
IMAG0202IMG_20121121_192303_856barnwood coat rack

This is a coat rack built with barnwood from a 100 year old barn that I tore down. It is old growth redwood with a tung oil finish. The cap was cut and hammered from a sheet of copper. The rings are original hardware from the barn and have been clear coated to protect clothing hung on the rack. The hangers are ratcheting drill presses. The back of the handles were sanded down so they would sit flat against the main post. The feet are mortised together with a peg that runs from the main post down through the base. The whole thing is connected by a lag bolt and metal plate that have been inset into the base using a mortiser. This project was a gift for my grandparents.